Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson A35SS Angle Clip Stainless Steel


MSRP: $3.41
Price: $2.50
You Save: $0.91 (27 %)
Item Number: A35SS
Manufacturer: Simpson Strong-tie
Manufacturer Part No: A35SS
Simpson A35SS Angle Clip Stainless Steel
Products manufactured from Type 304, 305, 316 or 316L stainless steel provide greater durability against corrosion. Stainless steel fasteners are required with stainless steel connectors, and are available from Simpson Strong-Tie.

Types 304 and 305 stainless steels are not hardened by heat treatment and provide very good corrosion protection. Type 316 stainless steel is not hardened by heat treatment and provides the highest level of corrosion protection available, especially in environments with chlorides.

The larger LTP5 spans subfloor at the top of the blocking or rim joist. The embossments enhance performance and the min/max nailing option allows for design flexibility.

The LTP4 Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing.

The A35 anchor's exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure a great variety of connections.

Material: LTP4/LTP5—20 gauge; all others—18 gauge

Finish: Galvanized. Some products available in stainless steel or ZMAX coating; see Corrosion Information.

Installation:

  • Use all specified fasteners. See General Notes.
  • A35 – Bend one time only.

These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

These models are approved for installation with the Strong-Drive SD Structural-Connector screw.
See the load values.
Table
  1. Allowable loads are for one anchor. When anchors are installed on each side of the joist, the minimum joist thickness is 3".
  2. Roof loads are 125% of floor loads unless limited by other criteria.
  3. Some illustrations show connections that could cause cross-grain tension or bending of the wood during loading if not reinforced sufficiently. In this case, mechanical reinforcement should be considered.
  4. LTP4 can be installed over 3/8" structural sheathing with 8dx1 1/2" nails and achieve 0.72 of the listed load, or over 1/2" and achieve 0.64 of the listed load. 8d commons will achieve 100% load.
  5. The LTP5 may be installed over structural sheathing up to 1/2" thick using 8dx 1/2" nails with no reduction in load.
  6. Connectors are required on both sides to achieve F2 loads in both directions.
  7. NAILS: 8dx1 1/2 = 0.131" dia. x 1 1/2" long. See other nail sizes and information.

Simpson Strong-Tie A34A34SSA34ZA35A35SSA35ZLTP4LTP4ZLTP5

Related Products

Simpson A34SS Angle Clip Stainless Steel
MSRP: $2.64
Price: $2.04
You Save: $0.60 (23 %)
Simpson A34SS Angle Clip Stainless Steel
Simpson H2.5SS DISCONTINUED - USE H2.5ASS - NEW STYLE NUMBER
MSRP: $5.99
Price: $2.34
You Save: $3.65 (61 %)
Simpson H2.5SS DISCONTINUED - USE H2.5ASS - NEW STYLE NUMBER
Simpson H3SS Hurricane Clip/Tie Stainless Steel
MSRP: $5.99
Price: $2.09
You Save: $3.90 (65 %)
Simpson H3SS Hurricane Clip/Tie Stainless Steel
Simpson H4SS Hurricane Clip/Tie Stainless Steel
MSRP: $4.99
Price: $1.74
You Save: $3.25 (65 %)
Simpson H4SS Hurricane Clip/Tie Stainless Steel
Simpson H5SS Hurricane Clip/Tie Stainless Steel
MSRP: $5.99
Price: $1.91
You Save: $4.08 (68 %)
Simpson H5SS Hurricane Clip/Tie Stainless Steel
Simpson H8SS Hurricane Clip/Tie Stainless Steel
MSRP: $9.99
Price: $6.20
You Save: $3.79 (38 %)
Simpson H8SS Hurricane Clip/Tie Stainless Steel
Simpson H2ASS Hurricane Clip/Tie Stainless Steel
MSRP: $17.99
Price: $5.13
You Save: $12.86 (71 %)
Simpson H2ASS Hurricane Clip/Tie Stainless Steel
Simpson H2.5ASS Hurricane Clip/Tie Stainless Steel
MSRP: $5.99
Price: $2.34
You Save: $3.65 (61 %)
Simpson H2.5ASS Hurricane Clip/Tie Stainless Steel