Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson AC6Z Post Cap Z-Max


MSRP: $7.99
Price: $7.34
You Save: $0.65 (8 %)
Item Number: AC6Z
Manufacturer: Simpson Strong-tie
Manufacturer Part No: AC6Z
Simpson AC6Z Post Cap Z-Max
These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.
These models are approved for installation with the Strong-Drive SD Structural-Connector screw.
See the load values.

Table
  1. Allowable loads have been increased for wind or earthquake with no further increase allowed; reduce where other load durations govern.
  2. Loads apply only when used in pairs.
  3. LPCZ lateral load is in the direction parallel to the beam.
  4. MIN nailing quantity and load values - fill all round holes;
    MAX nailing quantities and load values - fill round and triangle holes.
  5. Uplift loads do not apply to splice conditions.
  6. Spliced conditions must be detailed by the Designer to transfer tension loads between spliced members by means other than the post cap.
  7. LCE4 uplift load for mitered corner conditions is 985 lbs. (DF/SP) or 845 lbs. (SPF).
  8. Structural composite lumber columns have sides that show either the wide face or the edges of the lumber strands/veneers. Values in the tables reflect installation into the wide face. See technical bulletin T-SCLCOLUMN for values on the narrow face (edge).
  9. NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long. See other nail sizes and information.

The LCE4's universal design provides high capacity while eliminating the need for rights and lefts. For use with 4x or 6x lumber. LPCZ—Adjustable design allows greater connection versatility.

Material: LCE4—20 gauge; AC, ACE, LPC4Z—18 gauge; LPC6Z—16 gauge

Finish: Galvanized. Some products available in ZMAX coating and stainless steel; see Corrosion Information.

Installation:

  • Use all specified fasteners. See General Notes.
  • Install all models in pairs. LPCZ—2 1/2” beams may be used if 10dx1 1/2” nails are substituted for 10d commons.

Related Products

Simpson A34Z Angle Clip Z Max
MSRP: $0.65
Price: $0.64
You Save: $0.01 (2 %)
Simpson A34Z Angle Clip Z Max
Simpson A35Z Angle Clip Z Max
MSRP: $0.59
Price: $0.48
You Save: $0.11 (19 %)
Simpson A35Z Angle Clip Z Max
Simpson ABU44Z Adjustable Post Bottom/Base 4x4 Z max
MSRP: $21.11
Price: $14.73
You Save: $6.38 (30 %)
Simpson ABU44Z Adjustable Post Bottom/Base 4x4 Z max
Simpson ABU46Z Adjustable Post Bottom/Base 4x6 Z max
MSRP: $41.05
Price: $29.50
You Save: $11.55 (28 %)
Simpson ABU46Z Adjustable Post Bottom/Base 4x6 Z max
Simpson ABU66Z Adjustable Post Bottom/Base 6x6 Z max
MSRP: $45.65
Price: $30.29
You Save: $15.36 (34 %)
Simpson ABU66Z Adjustable Post Bottom/Base 6x6 Z max
Simpson AC4Z Post Cap Z-Max
MSRP: $4.89
Price: $4.18
You Save: $0.71 (15 %)
Simpson AC4Z Post Cap Z-Max
Simpson ACE4Z Post Cap End Z Max
MSRP: $5.99
Price: $5.80
You Save: $0.19 (3 %)
Simpson ACE4Z Post Cap End Z Max
Simpson CS16Z Coiled Strap 16gauge 150FT Roll Z Max
MSRP: $206.33
Price: $172.21
You Save: $34.12 (17 %)
Simpson CS16Z Coiled Strap 16gauge 150FT Roll Z Max

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)