Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson L30SS Angle Clip/Bracket Stainless Steel


MSRP: $9.99
Price: $8.05
You Save: $1.94 (19 %)
Item Number: L30ss
Manufacturer: Simpson Strong-tie
Manufacturer Part No: L30SS
Simpson L30SS Angle Clip/Bracket Stainless Steel

L—Staggered nail pattern reduces the possibility for splitting.

LS—Field-adjustable 0° to 135° angles.

The GA Gusset Angles' embossed bend section provides added strength.

Material: L—16 gauge; GA and LS—18 gauge

Finish: Galvanized. Some products available in stainless steel or ZMAX® coating; see Corrosion Information.

Installation:

  • Use all specified fasteners; see General Notes.
  • LS—field skewable; bend one time only.
  • Joist must be constrained against rotation (for example, with solid blocking) when using a single LS per connection.
  • Nail the L angle's wider leg into the joist to ensure table loads and allow correct nailing.

Some products may be installed with the Strong-Drive® SD Structural Connector screw - click here for details

Load Table: See code report listings below
These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.
These models are approved for installation with the Strong-Drive SD Structural-Connector screw.
See the load values.
Table
  1. L angles—loads are for condition F1 or F2
    LS angles—loads are for condition F1 only.
  2. GA1 and GA2 angles table loads are F1 — loads for F2 are 220 and 335 lbs. (100) and 280 and 415 lbs. (125), respectively.
  3. Roof loads are 125% of floor loads unless limited by other criteria.
  4. Connectors are required on both sides to achieve F2 loads in both directions.
  5. L angles may be installed with 10dx1 1/2 nails and achieve full load.
  6. NAILS: 16d = 0.162" dia. x 3 1/2" long, 
    10d = 0.148" dia. x 3" long, 
    10dx1 1/2 = 0.148" dia. x 1 1/2" long. 
    See other nail sizes and information.
Simpson Strong Tie GA1GA2L30L30SSL50L50SSL50ZL70L70SSL70Z, L90L90SSL90Z,
LS30LS30ZLS50LS50SSLS50ZLS70LS70ZLS90LS90Z

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)