Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson LBPS5/8Z Bearing Plate Slotted Square Washer 3x3 Z Max


MSRP: $1.99
Price: $1.68
You Save: $0.31 (16 %)
Item Number: LBPS5/8Z
Manufacturer: Simpson Strong-tie
Simpson LBPS5/8Z Bearing Plate Slotted Square Washer 3x3 Z Max
These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.
Table
  1. BP5/8SKT sold as a kit.
  2. Standard cut washer required with BPS1/2-3 and BPS5/8-3 and BPS3/4-3 (not provided) per the 2006 IRC and IBC.

Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections.

New for 2012:
The new BPS-6 bearing plates are 3"x4 1/2" rectangular plate washers that meet the latest code requirements for mudsill anchorage for shearwalls.

Features :
  • Designed for either 4x or 6x walls for added versatility
  • Available for 1/2", 5/8" and 3/4" diameter anchor bolts
  • The 1 3/4" slotted hole allows for adjustability to account for bolts that are not in the middle of the sill plate
  • Available uncoated or with a hot-dip galvanized (HDG) finish
Installation:
  • See General Notes.
  • Standard cut washer required (per 2009 and 2012 IRC and IBC) between bearing plate and nut.
  • Position BPS within 1/2" of sheathed edge of sill plate.

The BP1/2-3 and BP5/8-3 are 3"x3" bearing plates that meet the latest requirements of the IRC and IBC. These plate washers are available uncoated or with a hot dip galvanized (HDG) finish.

The BPS and LBPS are 3"x3" bearing plates that offer increased flexibility while meeting the latest requirements of the code. The slotted hole allows for adjustability to account for bolts that are not in the middle of the sill plate.

The BP5/8SKT uses SDS 1/4"x 1 1/2" screws to provide lateral resistance when 5/8" diameter sill holes are overdrilled (screws are provided). The shear capacity of the connection and sill/anchor bolt shall be determined by the Designer for each installation.

Material: See tables.

Finish: LBP, LBPS & BP5/8S—Galvanized; BP7/8-2—Zinc Plated; BPS, BP—None. BP's and BPS's may be ordered HDG; LBP and LBPS products may be ordered ZMAX; Contact Simpson Strong-Tie. See Corrosion Information.

Installation: See General Notes.

Codes: See Code Reports. 2006 IRC R602.11.1, 2006 IBC 2305.3.11

Simpson Strong Tie LBP1/2LBP1/2ZLBP5/8LBP5/8ZLBPS1/2LBPS1/2Z
LBPS5/8LBPS5/8ZBPS1/2-3BPS1/2-3HDGBPS5/8-3BPS5/8-3HDGBP3/8-2
BP1/2BP1/2HDGBP1/2-3BP1/2-3HDGBP5/8-2BP5/8SKTBP5/8BP5/8HDG
BP5/8-3BP5/8-3HDGBP3/4BP3/4HDGBP3/4-3BPS3/4-3BP7/8-2BP7/8BP1

Related Products

Simpson BP3/4 Bearing Plate Square Washer
MSRP: $2.99
Price: $1.98
You Save: $1.01 (34 %)
Simpson BP3/4 Bearing Plate Square Washer
Simpson BP5/8-3HDG Bearing Plate Square Washer Galvanized
MSRP: $2.99
Price: $2.74
You Save: $0.25 (8 %)
Simpson BP5/8-3HDG Bearing Plate Square Washer Galvanized

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)