Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson LRU212 Rafter to Ridge Hanger


MSRP: $8.99
Price: $7.87
You Save: $1.12 (12 %)
Item Number: LRU212
Manufacturer: Simpson Strong-tie
Manufacturer Part No: lru212
Simpson LRU212 Rafter to Ridge Hanger
LRU Rafter Hanger

The LRU hanger is an economical field slopeable hanger designed to make the rafter-to-ridge connection with solid-sawn rafters 2x6 – 2x12 in size.
Features:

  • The open design and ability to field-adjust the slope makes the LRU ideal for both retrofit or new applications
  • Accommodates roof pitches from 0:12 to 14:12
  • For added versatility the fasteners are placed higher on the hanger allowing the bottom of the rafter to hang below the ridge beam (see "Max. C1" dimension in table)
  • Can be installed using nails or Strong-Drive SD structural-connector screws

Material: 18 gauge

Installation:

  • See General Notes.
  • Joist fasteners must be installed at an angle through the rafter or joist into the header to achieve the table loads. See Double Shear Nailing illustration.
  • See alternate installation below for retrofit applications
Table
  1. Allowable loads are based on a minimum 3" wide carrying member. For single 2x carrying members, use 10dx1 1/2" nails into the face and 10d commons into the joist, and reduce the allowable load to 0.81 of the tabulated value for 10d nails. Alternatively, use SD #10x1 1/2" into the face and SD #10x2 1/2" into the joist as shown in the table.
  2. Uplift loads have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern.
  3. Allowable loads in the table are based on a maximum joist slope of 45° (12:12). For slopes greater than 45°, up to 49° (14:12), the allowable loads are 0.85 of the table loads.
  4. NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long.
    See other nail sizes and information.
  5. SCREWS: SD #10x2 1/2 (model SD10212) = 0.161" dia. x 2 1/2" long, SD #10x1 1/2 (model SD10112) = 0.161" dia. x 1 1/2" long.

Related Products

Simpson HGUS26 Heavy Girder/joist/truss 2 x 6 Face Mount Hanger
MSRP: $16.99
Price: $14.96
You Save: $2.03 (12 %)
Simpson HGUS26 Heavy Girder/joist/truss 2 x 6 Face Mount Hanger
Simpson HGUS28 Heavy Girder/joist/truss 2 x 8 Face Mount Hanger
MSRP: $23.99
Price: $20.65
You Save: $3.34 (14 %)
Simpson HGUS28 Heavy Girder/joist/truss 2 x 8 Face Mount Hanger
Simpson HGUS26-2 Heavy Girder/joist/truss 2 x 6 DBL Face Mount Hanger
MSRP: $18.99
Price: $16.58
You Save: $2.41 (13 %)
Simpson HGUS26-2 Heavy Girder/joist/truss 2 x 6 DBL Face Mount Hanger
Simpson HGUS28-2 Heavy Girder/joist/truss 2 x 8 DBL Face Mount Hanger
MSRP: $21.99
Price: $19.63
You Save: $2.36 (11 %)
Simpson HGUS28-2 Heavy Girder/joist/truss 2 x 8 DBL Face Mount Hanger
Simpson HGUS28-3 Heavy Girder/joist/truss 2 x 8 TPL Face Mount Hanger
MSRP: $29.99
Price: $27.05
You Save: $2.94 (10 %)
Simpson HGUS28-3 Heavy Girder/joist/truss 2 x 8 TPL Face Mount Hanger
Simpson HGUS410 Heavy Girder/joist/truss Face Mount Hanger
MSRP: $29.99
Price: $27.13
You Save: $2.86 (10 %)
Simpson HGUS410 Heavy Girder/joist/truss Face Mount Hanger
Simpson HGUS412 Heavy Girder/joist/truss Face Mount Hanger
MSRP: $32.99
Price: $29.77
You Save: $3.22 (10 %)
Simpson HGUS412 Heavy Girder/joist/truss Face Mount Hanger
Simpson HGUS414 Heavy Girder/joist/truss Face Mount Hanger
MSRP: $38.99
Price: $35.01
You Save: $3.98 (10 %)
Simpson HGUS414 Heavy Girder/joist/truss Face Mount Hanger
Simpson HGUS48 Heavy Girder/joist/truss Face Mount Hanger
MSRP: $22.99
Price: $21.07
You Save: $1.92 (8 %)
Simpson HGUS48 Heavy Girder/joist/truss Face Mount Hanger

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)