Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson HSS2-2-SDS3 DOUBLE 2X STUD W/ SCREWS


MSRP: $13.99
Price: $13.72
You Save: $0.27 (2 %)
Item Number: HSS2-2-SDS3
Manufacturer: Simpson Strong-tie
Manufacturer Part No: HSS2-2-SDS3

HSS/SS Stud Shoes

Simpson HSS2-2-SDS3 DOUBLE 2X STUD W/ SCREWS

 

Stud Shoes reinforce studs notched in construction. They are NOT a total replacement of removed material. Installs over pipe up to 2 3/8" outside diameter.

HSS2-3 is designed for triple 2x studs.

HSS Stud Shoes provide tension load capacity as well as increased compression loads. Flared flange provides greater strength.

Material: 16 gauge.

Finish: Galvanized

Installation:

  • Use all specified fasteners. See General Notes.
  • HSS: Bend flanges at 90° angle during installation, then bend back and screw into position (screws supplied).
  • Bend flanges one cycle only.

Codes: Also see Code Reports.

      HSS2-SDS1.5 (16 gauge) Heavy stud shoes to reinforce and protect single 2x studs where pipe is located. Uses 12
Simpson Strong-Tie® Strong-Drive® 1/4"x1 1/2" SDS screws
       (included).
      • IRC - 2009/2012 R602.6 and P2603.2.1
      • IBC - 2009/2012 2308.9.10 & 2308.9.11
      • IPC - 2009 - 305.8 / 2012 - 305.6

      HSS2-3-SDS3 (16 gauge) Heavy stud shoe for triple 2x stud. Uses 12 
Simpson Strong-Tie® Strong-Drive® 1/4"x3" SDS screws
       (included).
      • IRC - 2009/2012 R602.6 and P2603.2.1
      • IBC - 2009/2012 2308.9.10 & 2308.9.11
      • IPC - 2009 - 305.8 / 2012 - 305.6

SS1.5 (16 gauge) stud shoes reinforce and protect plumbing in 2x.

    • IRC - 2009/2012 R602.6 and P2603.2.1
    • IBC - 2009/2012 2308.9.10 & 2308.9.11
    • IPC - 2009 - 305.8 / 2012 - 305.6

 

topGallery:
  roll over images below to see larger image
 
HSS
US Patent 6,176,057
HSS2-3
Step 1
Install HSS (HSS2-3 shown) over stud with flanges bent at a 90° angle.
Step 2
Bend HSS (HSS2-3 shown) flanges one time only. Screw into position.
SS Left: Typical SS3 Installation 
Right: Typical SS1.5 Installation

 

topLoad Table: See code report listings below
Table
  1. Roof loads are 125% of floor loads unless limited by other criteria. Floor loads may be adjusted for other load durations according to the code, provided they do not exceed roof loads.
  2. NAILS: 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long.
    See other nail sizes and information.
next  topCode Reports (PDFs):
LEGACY REPORTS
  IAPMO UES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
HSS See specific model numbers for code listings.
HSS2-2-SDS3   ESR-2608 / ESR-2523 *   FL10864      
HSS2-3-SDS3   ESR-2608 / ESR-2523 *   FL10864      
HSS2-SDS1.5   ESR-2608 / ESR-2523 *   FL10864      
HSS4-SDS3   ESR-2608 / ESR-2523 *   FL10864      
SS See specific model numbers for code listings.
SS1.5   ESR-2608 / ESR-2523 *   FL10864      
SS2.5   ESR-2608 / ESR-2523 *   FL10864      
SS3   ESR-2608 / ESR-2523 *   FL10864      
SS4.5   ESR-2608 / ESR-2523 *   FL10864      

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

 

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)