Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson HUC212-2 2x12 DBL Concealed Inverted/Inside Flange Face Mount Hanger


MSRP: $14.99
Price: $14.74
You Save: $0.25 (2 %)
Item Number: HUC212-2
Manufacturer: Simpson Strong-tie
Manufacturer Part No: HUC212-2
Simpson HUC212-2 2x12 DBL Concealed Inverted/Inside Flange Face Mount Hanger
HU/HUC - Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails.

HGUS - Face mount hanger used for high load applications. All hangers in this series have double shear nailing. This patented innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of common nails for all connections. (Do not bend or remove tabs)

Material: See tables.

Finish: Galvanized. Some products available in ZMAX coating; see Corrosion Information.

Installation:

  • Use all specified fasteners. See General Notes.
  • HU/HUC - can be installed filling round holes only, or filling round and triangle holes for maximum values.
  • HGUS - Nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
  • With 3x carrying members, use 16d x 2 1/2" (0.162" dia. x 2 1/2" long) nails into the header and 16d commons into the joist with no load reduction. With 2x carrying members, use 10d x 1 1/2" (0.148" dia. x 1 1/2" long) nails into the header and 10d commons into the joist, and reduce the load to 0.64 of the table value.
  • See more on installations to masonry or concrete.
Options:
  • HU hangers available with the header flanges turned in for 2 5/16" and larger widths, with no load reduction - order HUC hanger.
  • See Hanger Options for sloped and/or skewed HU models, and HUC (concealed flange) models.
  • Concealed flanges are not available for HGUS.
  • Other sizes available; consult Simpson.
  • See also HUS series.
Table

Also see HHUS, HGUS, and HUCQ in Structural Composite Lumber or GU Series hangers, HGU and HHGU

  1. 10d commons or 16d sinkers may be used instead of the specified 16d at 0.84 of the table load value.
  2. 16d sinkers may be used instead of the specified 10d commons with no load reduction.
  3. Uplift loads based on Douglas Fir and have been increased 60% for wind or earthquake loading with no further increase allowed. Reduce where other loads govern.
  4. MIN nailing quantity and load values - fill all round holes; 
    MAX nailing quantity and load values - fill all round and triangle holes.
  5. For SPF/HF uplift, use 0.86 x DF/SP uplift load for products requiring nails and 0.72 for products requiring screws.
  6. NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long.
    See other nail sizes and information.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)