Browse Categories
Browse by Manufacturer
Mailing Lists

Simpson LSU26 Adjustable Light Slopable/Skewable U Hanger

MSRP: $5.99
Price: $5.20
You Save: $0.79 (13 %)
Item Number: LSU26
Manufacturer: Simpson Strong-tie
Manufacturer Part No: LSU26
Simpson LSU26 Adjustable Light Slopable/Skewable U Hanger
The LSU and LSSU series of hangers may be sloped and skewed in the field, offering a versatile solution for attaching joists and rafters. These hangers may be sloped up or down and skewed left or right, up to 45°.

Finish: Galvanized. Some products available in ZMAX coating; see Corrosion Information.


  • Use all specified fasteners. See General Notes.
  • Attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the supporting members.
  • See an installation video on this product.
  1. Roof loads are 125% of floor loads unless limited by other criteria.
  2. Uplift loads include an increase for wind or earthquake loading with no further increase allowed; reduce when other loads govern.
  3. Truss chord cross-grain tension may limit allowable loads in accordance with ANSI/TPI 1-2007. Simpson Strong-Tie Connector Selector software includes the ANSI/TPI evaluation in its hanger allowable loads. For additional information, contact Simpson Strong-Tie.
  4. For skewed LSSU hangers, the inner most face fasteners on the acute angle side are not installed.
  5. Do not substitute 10dx1 1/2" nails for face nails on slope and skew combinations or skewed only LSU and LSSU.
  6. NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long. 
    See other nail sizes and information.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)