Browse Categories
Browse by Manufacturer
Mailing Lists
Search

Simpson WA12590SS Wedge-All 304/303 Stainless Steel 1-1/4" X 9"- 5ct


MSRP: $309.99
Price: $256.01
You Save: $53.98 (17 %)
Item Number: WA12590SS
Manufacturer: Simpson Strong-tie
Manufacturer Part No: WA12590SS

The Wedge-All® wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut. Tie-wire anchors are set with the claw end of a hammer.

SPECIAL FEATURES

  • One piece wrap around clip
  • Threaded end is chamfered for ease of starting nut
  • Most sizes feature full thread for added versatility
WEDGE-ALL ANCHOR PRODUCT DATA - STAINLESS STEEL
 

Wedge-All Product Data - Stainless Steel

  1. Anchors with the "SS" suffix in the model number are manufactured from type 303 stainless steel, the remaining anchors (with the "4SS" suffix) are manufactured from type 304 stainless steel. Type 303 stainless anchors may require extra lead time, call factory for details. Types 303 and 304 stainless steel perform equally well in certain corrosive environments.
  2. Anchors with the "3SS" suffix in the model number may require extra lead time. Call Simpson Strong-Tie for details.
  3. These package quantities available in type 303 stainless steel only.
  4. The published length is the overall length of the anchor. Allow one anchor diameter for the nut and washer thickness plus the fixture thickness when selecting a length.
  5. Special lengths are available on request. Load values are valid as long as minimum embedment depths are satisfied.

Mini Pack: These package quantities must be ordered with a "-R" suffix on the end of the standard model number. (example: WA505124SS-R).

304/303 Material Specifications

  1. Type 303 and 304 stainless steels perform equally well in certain corrosive environments. Larger sizes are manufactured from type 303.

Application: Exterior environment, high level of corrosion resistance. Resistant to organic chemicals, many inorganic chemicals, mild atmospheric pollution and mild marine environments (not in direct contact with salt water). See more corrosion information.


316 Material Specifications

  1. Type 316 stainless steel provides the greatest degree of corrosion resistance offered by Simpson Strong-Tie®.

Application: Exterior environment, high level of corrosion resistance. Resistant to chlorides, sulfuric acid compounds and direct contact with salt water. See more corrosion information.

Wedge-All® Wedge Anchors

 

Tension Loads for Stainless Steel Wedge-All® Anchors

 

in Normal-Weight Concrete

 
Tension Load Normal Weight Concrete
Tension Loads for Stainless Steel Wedge-All Anchors in Normal-Weight Concrete
  1. The allowable loads listed are based on a safety factor of 4.0.
  2. Refer to allowable load-adjustment factors for spacing and edge distance.
  3. Drill bit diameter used in base material corresponds to nominal anchor diameter.
  4. Allowable loads may be linearly interpolated between concrete strengths listed.
  5. The minimum concrete thickness is 1 1/2 times the embedment depth.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)