Description
Stud shoes reinforce studs notched in construction. They are not a total replacement of removed material. Installs over pipe up to 2 3/8" outside diameter.
HSS stud shoes provide tension load capacity as well as increased compression loads. Flared flange provides greater strength.
Material
- 16 gauge
Finish
- Galvanized
Installation
- Use all specified fasteners; see General Notes
- HSS — bend flanges at 90° angle during installation, then bend back and screw into position (screws supplied)
- Bend flanges one cycle only
Load Tables
Many of these products are approved for installation with Strong-Drive® SD Connector screws.
- Roof loads are 125% of floor loads unless limited by other criteria. Floor loads may be adjusted for load durations according to the code provided they do not exceed those in the roof column.
- Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Extra Information
Brand:
Simpson Strong-Tie
Weight:
0.80 LBS
