Description
The HTT is designed to resist medium tension loads that are fastened with #10 screws. This single-piece formed heavy tension tie has a four-ply formed seat, is designed without rivets and does not require washers. This tension tie provides high-strength, post-pour, concrete-to-steel connections.
Key Features
- Ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
Material
- 111 mil (11 ga.)
Finish
- Galvanized (G90)
Installation
- Use all specified fasteners.
- Use the specified number and type of screws to attach the strap portion to the steel stud. Bolt the base to the wall or foundation with a suitable anchor; see table for the required bolt diameter.
- See SB and SSTB anchor bolts for anchorage options.
- See SET-XP® and AT-XP® adhesive products for anchor bolt retrofit options.
Options
- Special sizes can be made to order; contact Simpson Strong-Tie
Load Tables
These products are available with additional corrosion protection. Additional products on this page may also be available with this option. Check with Simpson Strong-Tie for details.
Many of these products are approved for installation with Strong-Drive® SD Connector screws.
- Allowable load for HTT5 with a BP 5/ 8-2 bearing-plate washer installed in the seat of the holdown is 5,295 lb. for DF/SP and 4,555 lb. for SPF/HF.
- Fasteners: Nail dimensions in the table are listed diameter by length. SD and SDS screws are Strong-Drive® screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Extra Information
Brand:
Simpson Strong-Tie
Weight:
2.10 LBS
