SET-3G™ High-Strength Epoxy Adhesive

Key Features

• Exceptional performance — superior bond-strength values at even long-term elevated temperature of 110°F (43°C) using optimized drill bit diameters
• Tested in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
• Design flexibility — can be specified for dry or water-saturated conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C)
• Jobsite versatility — can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40°F (4°C) and 100°F (38°C)
• Maximized production and safety — qualified for installation using the Speed Clean^™ DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
• Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method
• Available in two cartridge configurations for maximum versatility — 8.5 oz. coaxial or 22 oz. side-by-side cartridges dispensed using manual, battery or pneumatic dispensing tools
• With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas
• 1:1 ratio, two-component, high-strength, epoxy-based anchoring adhesive formula
• Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
• Low-odor formulation
• When properly mixed, SET-3G will be a uniform gray color
• Volatile organic compound (VOC) — 1.9 g/L
• Manufactured in the USA using global materials
• Tested per ACI355.4
• SET-3G code listed for installation with the Speed Clean^™ DXS drill bits without any further cleaning (ICC-ES ESR-4057)