Description
The GBC provides a proven, tested connection for the anchorage of building stability bracing to the top of the gable end wall. With allowable bracing installation angles between 40° to 60°, the GBC offers greater flexibility in a connector rated for both tension and compression loads.
Material
- 16 gauge
Finish
- Galvanized
Installation
- Use all specified fasteners; see General Notes
- The GBC must be installed in pairs to achieve full load capacity
Product Information Tables
Load Tables
Typical Sloped Installation
- For 1 3/4" x 3 1/2" (or larger) LVL gable brace, the allowable load at 40° to 45° is 635 lb. towards anchors, 515 lb. away from anchors.
- Loads have been increased for wind or earthquake loading, with no further increase allowed. Reduce where other loads govern.
- Use a minimum 2x4 gable brace. Larger members may be used.
- Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Extra Information
Brand:
Simpson Strong-Tie
Weight:
0.50 LBS
