RBC Roof Boundary Clip

No reviews yet Write a Review

SKU:

RBC

Description

The RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant.

Material

20 gauge

Finish

Galvanized

Installation

Use all specified fasteners; see General Notes
Field bend to desired angle — one time only

Load Tables

See General Notes for Straps and Ties.
Allowable loads are for one anchor attached to blocking a minimum of 1 1/2" thick.
RBC/RBCP can be installed with up to a 3/4" gap and achieve 100% of the listed load.
When attaching to concrete, use (3) 1/4" x 1 3/4" TTN2-25134H Titen^® 2 screws.
RBC/RBCP installed over 1" foam board has a load of 395 lb. (160) in a parallel-to- wall (F1) load direction for Douglas fir. For SPF, the load is 340 lb.
RBC/RBCP may be installed over 1/2" structural sheathing using 0.148" x 1 1/2" nails with no load reduction.
Fasteners: Nail dimensions in the table are listed diameter by length. Titen^® 2 screws are Simpson Strong-Tie^® masonry screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Product Series	Compliance/Certification	Report/Approval
RBC	International Building Code International Residential Code City of Los Angeles Building Code City of Los Angeles Residential Code	ER-112
RBC	Florida Building Code	FL10446
Footnotes Please review compliance documents for information about specific product models. In some cases, Compliance documents cover most but not all models associated with a product series. For additional information on Florida's Statewide Product Approval System and Miami-Dade County Notice of Acceptance (NOA), click here.

Extra Information

Brand:

Simpson Strong-Tie

Weight:

0.30 LBS